Grill & Net Care

Easy to Keep Like New

Simple steps to keep invisible grills and safety nets clean, tight and strong.

Section 01 / Invisible Grills

Cleaning Invisible Grills

Invisible grill cables have a clear nylon coating that sheds water and dust.

Recommended Cleaning

Wipe cables every 3–6 months using a soft microfiber cloth dampened with lukewarm water and mild neutral soap. Rinse with clean water and dry with a lint-free towel.

Avoid Abrasives

Never use steel wool, wire brushes, strong acids, or chlorine-based solvents. Abrasive scrubbers can scratch the protective polymer coating.

Section 02 / Renovation Guidelines

During Painting or Civil Work

When you repaint or do civil work near your grills or nets:

1. Masking Protection

Cover the aluminum track profiles and lower cable junctions with masking tape and protective plastic sheets before sanding or applying primer.

2. Paint Overspray

If latex water-based paint splatters on cables, wipe immediately with a damp warm towel. Do not scrape dry paint with sharp razor blades.

3. Leave the Anchors Alone

Do not tamper with or remove structural anchor expansion bolts embedded into the concrete slab during civil plastering.

Section 03 / Balcony Safety Nets

Cleaning Safety Nets

Good HDPE nets are UV-stabilised. Two simple habits keep them strong:

• Rinse gently with a low-pressure garden hose spray nozzle every 4–6 months to remove accumulated urban dust and bird feathers.

• Inspect corner anchor hooks once a year to ensure tension cords remain firmly engaged in their eyelets.

Safety Caution

Keep open flames, barbecue smokers, and festive fireworks away from polymer netting cords. High thermal exposure can fuse synthetic fibers.

Section 04 / Professional Services

Retensioning and Repairs

Invisible grills stay tight for a long time, but building movement or a knock can loosen a cable. An installer can help with:

Tension Recalibration

Retightening cables to bring back even spacing.

Single-Line Replacement

Replacing a cable cut during an emergency or civil work.

Anchor Inspection

Checking the anchors and replacing old fasteners or track covers.

Before You Book

Get It in Writing

Ask for these four things before you pay.

01 / Material

Steel Grade in Writing

Ask for SS304, or SS316 near the sea, and the cable thickness in your quote.

Material Standards →
02 / Fixing

Fixed Into Concrete

The aluminium track is bolted into the slab, and every cable is tension-locked.

Craftsmanship →
03 / Warranty

Warranty in Writing

From your installer, at handover. The warranty guide shows what it should cover.

Warranty Guide →
04 / Installers

Checked Installers

We check past work and customer references before sending any request. Serving 20 cities.

Service Areas →

Have your balcony and window openings measured at your home.

Free site visit and written quote from a checked local installer.

Book a Free Site Visit